M18 Hex Bolt High Tensile 8.8 BZP DIN 931

Description

M18,Hexagon/ Hex Head, Part Plain Shank, Partially Threaded Bolts, High Tensile, Steel Grade 8.8, Zinc Plated, DIN 931

Fixaballsells all lengths of M18,hexagon head, bolts.

Hexagon Head Bolt

Bolt is the term used for a partially threaded fastener (bolt with shoulder/ part plain shank bolt), with a head; designed to be used with a nut and washer.

Orders placed before 2pm are dispatchedsame day (Mon-Fri) and free shipping is Royal Mail, 2nd Class (2-5 days). Postage upgrades available at checkout.

Please make your, ‘No. of Items in Pack‘, ‘Length‘ and, ‘Quantity‘ of packs selection from the drop down menus.

M18 Hex Bolt BZP Lengths Available:

M18-2.50×60 MM,(PT) HEXAGON BOLT 8.8 DIN 931 COARSE ZINC CR+3

M18-2.50×70 MM,(PT) HEXAGON BOLT 8.8 DIN 931 COARSE ZINC CR+3

M18-2.50×80 MM,(PT) HEXAGON BOLT 8.8 DIN 931 COARSE ZINC CR+3

M18-2.50×90 MM,(PT) HEXAGON BOLT 8.8 DIN 931 COARSE ZINC CR+3

M18-2.50×100 MM,(PT) HEXAGON BOLT 8.8 DIN 931 COARSE ZINC CR+3

M18-2.50×120 MM,(PT) HEXAGON BOLT 8.8 DIN 931 COARSE ZINC CR+3

Metric Threads

Metric Coarse(Standard Thread)dimensionsare measured inMillimetre (mm)units and were developed to simplify the imperial systems. Europe moved to this system but the Americans chooseImperialas their default. Acoarsethreadhaslesshelical coils per mm than a Metric Fine Thead.Coarseis used forheavierloads andfineis used forlighterloads prone tovibrations.

Bolt Thread

The thread length of a shoulder bolt/ plain shank bolt tends to be 2.5 times the diameter of the fastener. Please ask for exact measurements if the shoulder is crucial.

Bolt vs Screw

A screw screws into something, a bolt joinsseveral things together from both sides of materials joined. A screw is fully threaded from underneath the head and a bolt is partially threaded (has a part-plain shank)

Zinc/ BZP Coating

Zinc coats the fastener to add moisture resistance to the steel to slow down the oxidisation (rusting) of the metal. It does not make the steel waterproof. Zinc is used for inernal application for an aesthetic shine (chrome type finish) or where there is likely to be moisture on the screw e.g. garage. Self-colour (no coating) is ok to use with a light covering of oil/ grease, when the fastener is not on show or its appearance is not important.

DIN 931 Hex Bolts Dimensions

Image is for illustrative purposes only.