Description
3M Scotch-Weld Structural Adhesive 7260 B/A FC (Fast Cure) 400ml3M Scotch-Weld Structural Plastic Adhesive 7260 B/A exhibits high strength even at high temperatures and good aging resistance. Even with minimal preparation Scotch-Weld 7260 B/A two component structural adhesive ahcieves outstanding adhesion to metals and adheres well to many other surfaces. It also is fast setting with a working time of only 90 minutes . This time can be shortened with heating.Applications;- Mounting and Trim attachment
– Panel to Frame/Stiffner to Panel Assembly
– Small Joint assembly
| Substrate 1 | Ceramic Glass Metal (Unpainted) Paint Paints (Powder Coat, Painted Metal, Composite Panel) Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon) Stone |
| Substrate 2 | Ceramic Glass Metal (Unpainted) Paint Paints (Powder Coat, Painted Metal, Composite Panel) Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon) Stone |
Directions for Use:Important: Use only the specified 3M EPX Manual Applicator
1) Apply adhesive to clean, dry substrates, which are free of paint, oxide films, oils,dust, mold release agents and all other surface contaminants.2)Place 400ml duo-pak cartridge in EPX Manual Applicator applicator. Remove cap. Dispense and discarda small amount of adhesive to assure even ratio and free flow. Clear orifice ifnecessary. Use only gold mixing nozzle 127mm by: (a) aligning nozzle notchwith cartridge recess, and (b) twisting into place.Dispense and discard a smallamount of adhesive through nozzle until the adhesive is mixed.
Note: 7260 B/A 400ml Adhesive require 3M EPX Manual 400ml Applicator, and EPX Square Gold Mixing Nozzle 127mm for proper use
3M Stock #:7000033763
UPC Code: 53134375434558
3M Catalogue #: 7260B/A FC-400ML
