Description
M8 x 30mm, Brass, Hexagon Threaded Bar/ Rod Connector Long Nut
Fixaball sells M8 x 30mm, Hexagon, Threaded Bar/ Rod, Connector Long Nuts.
Hexagon Threaded Bar/ Rod Connector Nut Application
A hexagon connector nut is used as a coupling 2 threaded bars together. To fasten the rods you would turn the connector nut clockwise/ to the right (righty-tighty) until the threaded bar reaches half way up the nut. Then, turn the connecting threaded bar (wearing hand protection) into the open end until it meets the other that’s altready inserted.
Use an adjustable spanner or correct sized spanner to tighten or reease the threaded bar connection.
These connector nuts are standard coarse thread and will fit the following standard metric diameters/ threads)
Orders placed before 2pm are dispatched same day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.
Please make your ‘No. of Items in Pack‘, ‘Diameter‘ and ‘Quantity‘ of packs selection from the drop down menus.
Hex Allthread Connector Nut, BZP, Sizes Available
| BZP All Thread Bar/ Studding Connectors – M6 x 18mm |
| BZP All Thread Bar/ Studding Connectors – M8 x 24mm |
| BZP All Thread Bar/ Studding Connectors – M10 x 30mm |
| BZP All Thread Bar/ Studding Connectors – M12 x 36mm |
| BZP All Thread Bar/ Studding Connectors – M16 x 48mm |
| BZP All Thread Bar/ Studding Connectors – M20 x 60mm |
| BZP All Thread Bar/ Studding Connectors – M24 x 72mm |
Diameter (d) |
Standard Coarse Thread Pitch |
Across Flats |
Continuous Thread |
M8 |
1.25mm |
17 |
Yes |
