Description
M12 x Under and Including 100mm, Cap Head, Bolt/ Socket Screw/ Allen Bolt, High Tensile (12.9), Zinc Plated, DIN 912. ISO 4762
Fixaballsells all lengths of M12, zinc plated, allen socket, cap head screw/ bolts.
Descrcription: M12 socket cap screw/ bolts.
Material: High tensile grade 12.9 steel.
Coating/ Finish: Bright zinc plated.
Thread: Threads are metric coarse M12 x 1.75mm pitch.
Head diameter: 18mm.
Head height: 12mm.
Allen key size: 10mm.
Standard: DIN 912.
Note: Bolt lengths do not include the head.
What is a socket cap screw/ bolt?
The, Socket Cap Screw/ Allen Bolt, term is used to describe a fastenerthat is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). Socket, refers to the hexagon shaped indentation found on the top of the fasteners head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. ‘Cap’ refers to the cylindrical shaped head.
Orders placed before 2pm are dispatchedsame day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.
M12 x 1.75mm Pitch(Standard Coarse Thread), Cap Head, Bolt/ Socket Screw/ Allen Bolt, High Tensile (12.9), Zinc Plated,lengths available:
FT –Fully Threaded
PT –Partially Threaded
| M12-1.75×20 MM,(FT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×25 MM,(FT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×30 MM,(FT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×35 MM,(FT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×40 MM,(FT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×45 MM,(FT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×50 MM,(FT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×55 MM,(PT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×60 MM,(PT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×65 MM,(PT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×70 MM,(PT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×75 MM,(PT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×80 MM,(PT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×85 MM,(PT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×90 MM,(PT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×95 MM,(PT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
| M12-1.75×100 MM,(PT) SOCKET HEAD CAP SCREWS 12.9 ISO 4762 / DIN 912 COARSE ZINC-BAKE CR+3 |
|
FIXABALL Specialist Fixings and Fasteners Suppliers |
|
|
Allen Socket, Cap Head Screw Size Diameter |
Allen/ Hex/ Hexagon Key Required to tighten and loosen |
|
M12 |
10 |
Material:High Tensile (12.9 Grade)– Zinc. BZP
Grade 12.9 Steel has a higher carbon content than your regular 8.8 high tensile steel and is therefore better for hardness and rigidity. Zinc provides a shiny metallic finish and some resistance to weathering.
Metric Coarsethreads are in millimetre (mm) units and were developed to simplify the imperial systems.Acoarsethreadhasless helical coils per mm andis used forheavier/ higher torque loads. Coarse threads are the, ‘normal’, most common versions.
Image is for illustrative purposes only.
