Description
M10 x Under and Including 100mm,Hex Head, Bolts, Partially Threaded Bolts in A2-70/ 304 Stainless Steel, DIN 931,plus Nut and Washers
Fixaballsells all lengths of M10 Hexagon Bolts in A2-70/ 304 Stainless Steel,plus Nut and Washers.
Hex-Bolt vs Hex-Set Screw
A set screw fastens materials together by twisting it directly through the last component, into a pre-threaded hole, pulling everything together. A bolt fastens materials by passing them through pre drilled holes in the adjoining materials and cramping them between the head at one end and a nut on the other. Additional washers are often used to spread the load further. A set screw is fully threaded from underneath the head and a bolt is partially threaded (has a part-plain shank). A bolt is used when you know the length you need and a set screw can be used as a bolt if you need more flexibility in the length.
Orders placed before 2pm are dispatched same day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days).For a faster delivery time, select 1st class or courier at checkout.
Please choose your, ‘No. of Items in Pack‘, ‘Length‘, and ‘Quantity‘, of packs selection from the drop down menus.
M10 Hex Bolt Lengths available:
| M10 X 35 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 40 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 45 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 50 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 55 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 60 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 65 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 70 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 75 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 80 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 85 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 90 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 95 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
| M10 X 100 HEXAGON HEAD BOLT DIN 931 A2-70 STAINLESS STEEL |
Head Type
Hexagon Head.
Spanner Sizes
|
FIXABALL Specialist Fixings and Fasteners Spanner Sizes METRIC – Hexagon Head Bolts/ Sets |
|
|
Thread Size/ Diameter |
Spanner Size |
|
M10 (10mm) |
17mm |
METRIC THREADS
Metric Coarse dimensionsare measured inMillimetres (mm) units and were developed to simplify the imperial systems. Acoarsethreadhasless helical coils per mm and is used forheavier/ higher torque loads.
|
Metric Threads/ Pitches |
|||
|
Fixaball Specialists in Fixings and Fasteners |
|||
|
Pitch / Thread Types |
|||
|
Size |
Standard/ Coarse |
Fine |
Super Fine |
|
M10 |
1.5 |
1.25 |
1.0 |
Image is for illustrative purposes only.
