Description
UNF 1/2″ (20 T.P.I.), Fine Pitch, High Tensile (12.9), Self Colour DIN 912. Allen (hex) Socket, Cap Head, Allen Screw/ Bolt, ISO 4762, BS 2470, Series 1960
Fixaballsells all lengths of 1/2″ UNF, Allen (hex) Socket, Cap Head, Allen Screw/ Bolt.
What is a socket cap screw/ bolt?
The, Socket Cap Screw/ Allen Bolt, term is used to describe a fastenerthat is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). Socket, refers to the hexagon shaped indentation found on the top of the fasteners head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. ‘Cap’ refers to the cylindrical shaped head.
Orders placed before 2pm are dispatchedsame day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.
Please make your‘No. of Items in Pack’, ‘Length’and‘Quantity’of packs, selection from the drop down menus.
UNF 1/2″ (20 T.P.I.) Allen Socket, Cap Head Screw/ Bolt lengths at Fixaball:
(FT –Fully Threaded,PT –Partially Threaded)
| 1/2″-20×1/2″,(FT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×3/4″,(FT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×1″,(FT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×1 1/4″,(FT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×1 1/2″,(FT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×1 3/4″,(FT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×2″,(FT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×2 1/4″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×2 1/2″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×2 3/4″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×3″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×3 1/4″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×3 1/2″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×3 3/4″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×4″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×5″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×6″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×6 1/2″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×7″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
| 1/2″-20×8″,(PT) SOCKET HEAD CAP SCREWS UNF S/COLOUR 1936-1960 |
High Tensile 12.9 Grade.
Available Materials: Black/ Self Colour
|
Material/ Finish |
Appearance |
Level of Corrosion Resistance |
Typical Application |
|
High Tensile Steel |
Self-Colour (black) |
Low, without further surface treatment |
– No exposure to moisture – Often Greased/ Oilied |
|
FIXABALL Allen/ Hex Socket Sizes to fit, Allen/ Hex Cap Head, Screw/ Bolts |
|
Diameter Size |
Series 1960 (MOST COMMON) |
Series 1936 (USUALLY ASSOCIATED WITH B.S, BSW, BSF THREADS) |
|
1/2″ |
3/8″ |
3/8″ |
|
Fixaball Specialist Fixings and Fasteners UNC/UNF Socket Cap Screws Dimensions Conforming to ASME/ ANSI B18.3 1960 Series All measurements in Inches |
||||||
|
Pitch TPI |
HeadDiameter |
Shank Diameter |
HeadHeight |
HexKey Size |
||
|
Diameter |
UNC |
UNF |
Max |
Max |
Max |
Nom |
|
13 |
20 |
0.75 |
0.50 |
0.50 |
3/8 |
UNIFIED THREAD STANDARDS
The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. They are a complete and integrated system of threads for fastening purposes. Their outstanding characteristic is general interchangeability of threads achieved through the standardization of thread form, diameter-pitch combinations, and limits of size
Unified National (UN) thread form with a rounded root contour, applies only to external threads. (The UN thread form has a flat, or optionally, a rounded root contour.) The majority of fasteners with a Unified thread form (UNC UNF) have a rounded root contour i.e. are UNR threads.
Unified National Fine (UNF) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a smaller thread pitch than an equivalent diameter UNC thread.
Image is for illustrative purposes only.
