Description
M16 x 1.5P (fine pitch) Hexagon Head Bolts, Partially Threaded, High Tensile (8.8), Self Colour, DIN 960
Fixaballsells all lengths of M16 x 1.5mm fine thread pitch, hex bolts.
Hexagon Head Bolt
Bolt is the term used for a partially threaded fastener (bolt with shoulder/ part plain shank bolt), with a head; designed to be used with a nut and washer.
Orders placed before 2pm are dispatchedsame day (Mon-Fri) and free shipping is Royal Mail, 2nd Class (2-5 days). Postage upgrades available at checkout.
Please make your, ‘No. of Items in Pack‘, ‘Length‘ and, ‘Quantity‘ of packs selection from the drop down menus.
M16 x 1.5 Pitch (fine), Hexagon Bolt (partially threaded) Lengths Available:
| M16 X 1.50P X 40 HT Hex Bolt Gr8.8 DIN 960 |
| M16 X 1.50P X 50 HT Hex Bolt Gr8.8 DIN 960 |
| M16 X 1.50P X 60 HT Hex Bolt Gr8.8 DIN 960 |
| M16 X 1.50P X 70 HT Hex Bolt Gr8.8 DIN 960 |
| M16 X 1.50P X 80 HT Hex Bolt Gr8.8 DIN 960 |
| M16 X 1.50P X 100 HT Hex Bolt Gr8.8 DIN 960 |
Bolt vs Set Screw
A set screw fastens materials together by twisting it directly through the latest component material, into a pre-threaded hole, pulling everything together. A shoulder bolt fastens materials by passing them through pre drilled holes in the adjoining materials and cramping them between the head at one end and a nut on the other. Additional washers are often used to spread the load further. A set screw is fully threaded from underneath the head and a bolt is partially threaded (has a part-plain shank). A bolt is used when you know the length you need and a set screw can be used as a bolt if you need more flexibility in the length.
Head Type
Hexagon Head.
Spanner Sizes
|
FIXABALL Specialist Fixings and Fasteners Spanner Sizes METRIC – Hexagon Head Bolts/ Sets |
|
|
Thread Size/ Diameter |
Spanner Size |
|
M3 (3mm) |
5.5mm |
|
M4 (4mm) |
7mm |
|
M5 (5mm) |
8mm |
|
M6 (6mm) |
10mm |
|
M8 (8mm) |
13mm |
|
M10 (10mm) |
17mm |
|
M12 (12mm) |
19mm |
|
M14 (14mm) |
22mm |
|
M16 (16mm) |
24mm |
Threads
Metric Threadsare measured inMillimetres (mm) units and were developed to simplify the imperial systems. Europe moved to this system but the Americans chooseImperialas their default. Acoarsethreadhaslesshelical coils per mm and a fine one has more.Coarseis used forheavierloads andfineis used forlighterloads prone tovibrations.
|
Metric Threads/ Pitches |
|||
|
Fixaball Specialists in Fixings and Fasteners |
|||
|
Pitch / Thread Types |
|||
|
Size |
Standard/ Coarse |
Fine |
Super Fine |
|
M1.6 |
0.35 |
||
|
M2 |
0.4 |
||
|
M2.5 |
0.45 |
||
|
M3 |
0.5 |
||
|
M4 |
0.7 |
||
|
M5 |
0.8 |
||
|
M6 |
1.0 |
||
|
M7 |
1.0 |
||
|
M8 |
1.25 |
1.0 |
|
|
M10 |
1.5 |
1.25 |
1.0 |
|
M12 |
1.75 |
1.5 |
1.25 |
|
M14 |
2.0 |
1.5 |
|
|
M16 |
2.0 |
1.5 |
|
|
M18 |
2.5 |
2.0 |
1.5 |
|
M20 |
2.5 |
2.0 |
1.5 |
|
M22 |
2.5 |
2.0 |
1.5 |
|
M24 |
3.0 |
2.0 |
|
|
M27 |
3.0 |
2.0 |
|
|
M30 |
3.5 |
2.0 |
|
|
M33 |
3.5 |
||
|
M36 |
4.0 |
||
|
M39 |
4.0 |
||
|
M45 |
4.5 |
||
|
M52 |
5.0 |
||
|
M56 |
5.5 |
Image is for illustrative purposes only.
